Charnwood Viper M2026 Cryo Hardened M2 HSS 5mm Standard Parting Tool

Charnwood Viper M2026

Cryo Hardened M2 HSS 5mm Standard Parting Tool

• 5mm Wide Standard Parting Tool
• Rectangle Section 5mm x 12mm For Maximum Rigidity
• Double Bevelled Cutting Tip
• Blade Made From M2 HSS Steel
• Cryo Hardened To 65HRC
• Contoured Handles Made From Ash
• Distinctive Stainless Steel Ferrules
• Blade Length 130mm
• Handle Length 220mm
• Supplied In A Transparent Hanging Storage Tube

Intended Use

• Used to part the finished project off from the waste material, the parallel sides make for a rigid tool that is comfortable to use. The 5mm wide tool reduces the amount of waste removed when parting. An essential consideration if the timber is expensive.
• Can be used to form beads, fillets and spigots ready for chuck mounting.
• For making deep grooves when sizing spindle projects.

Cryo Hardened M2 HSS Woodturning Chisel

• Cryogenic treatment of M2 HSS means this steel has been subjected to a complex immersion procedure at temperatures as low as minus 195C. The result is that the High Speed steel has a hardness of 65HRC. That is extremely hard. Typical HSS chisels are 58HRC. A higher hardness level improves wear resistance and edge-holding ability, ensuring that your tools stay sharper for longer, typically 5 times longer than standard HSS chisels.
• With M2C chisels you spend more time turning: less time sharpening. When it is time for sharpening the blades are remarkably fast and easy to sharpen, as they allow you to remove less material to produce a perfect razor sharp edge.
• With handles made from Ash, distinctive stainless steel ferrules and laser etched blades. The blades are sharpened, polished and ready to go.

• Cutting Width: 5mm
• Rectangle Section: 5mm x 12mm
• Tip Shape: Double Bevel
• Blade Length: 130mm
• Handle Length: 220mm
• Total Tool Length: 350mm
• Weight: 170g