Trend C184X1/2TC CraftPro Guided Ogee Panel Raiser Router Cutter 22.2mm Rad x 1/2 Shank

TREND C184X1/2TC
CRAFT PRO ROUTER CUTTER
GUIDED OGEE PANEL RAISER 22.2MM RAD 

• Panel raiser cutters for producing the panel for cabinet panelled doors.
• The tool is fitted with a back cutter to ensure a maximum panel tongue thickness of 6.3mm.
• Must be used in a stationary variable speed router either mounted overhead or inverted in a router table at a reduced speed.
• For use on natural timber and MDF.
• Take several passes by adjusting back fence position with each pass.
• Stationary use only.
• Back cutter must be fitted at 90 degrees to main tool to reduce the cutting impact.

• Shank Diameter: 1/2 inch
• Cutter Diameter Metric (D): 85.7 mm
• Cut Length Metric (C): 15.9 mm
• Bearing Diameter Metric (B): 12.7 mm
• Metric (R): 22.2 mm
• Overall Length Metric: 78.5 mm
• Grade: TCT - Tungsten Carbide Tipped